At this point, it's just a giant puzzle.
Stacking up the different sizes pieces to cover up the Ikea Billy bookcase and looks awesome, with all the steps and levels to give it interest.
The only issue I ran into was my saw blade was dull and not meant for fine cutting, so I had a lot of jagged edges that needed sanding. I bought a new blade but Dave and I couldn't remove the old blade from my saw, so I just soldiered on as best I could.
I also struggled with corner cuts. I wanted to create a few 45 degree cuts so the corners looked professional and good. But they were more challenging than I was lead to believe. And the dull blade didn't help.
But, with a little time, and a quick trip to Home Depot to pick up a few more 2" trim pieces, I got to a place where I was really happy. This felt like a big win.
Next was caulking all the corners. I used a combination of wood putty and white caulk to tidy up all the seams and joints.
Let me tell you, you can cover up a multitude of less-than-great cuts with just a little caulk.
Then the Zinsser B-I-N Shellac-Based Interior Primer and Sealer (that's the one the internet said to use) went on to ensure the Ikea furniture took the paint and the wood knots and grain wouldn't bleed through the white paint. It was a little smelly and watery, but went on quick.
Once that primer got on, I got REALLY EXCITED about how this was turning out. I sprinted out to get the cabinet paint ASAP so I could finish this up.
Comments
Post a Comment